Basic Info.
Model NO.
DIN3 ISOEM U6-P2-O2
Auxiliary Power
12V
Output Signal
0-20mA
Isolation Voltage
3000VDC
Industrial Operating Temperature
-25 Degree to +70 Degree
Warranty Time
Two Years
Transport Package
DIN35 Rail Mounted, PP Bag and Gift Box
Trademark
Sunyuan or OEM
Origin
Guangdong, China
HS Code
8543709200
Production Capacity
50000PCS Per Month
Product Description
DIN3 Rail 0-5V/0-10V/4-20mA/0-20mA Current Voltage (I/V, I/I,V/I, V/V) Signal Isolation Amplifier Magneto-electric Isolation Transmitter/Converter
General characteristics:
>> Efficiency Grade:0.1/0.2
>> High precision, error and nonlinearity < 0.1%
>> 0-5V/0-10V/1-5V/0-+/-5V/0-+/-10V/0-10mA/0-20mA/4-20mA international standard current signal input and output
>> Three port isolation:Input/output/power supply isolation voltage can reach 3000VDC.
>> Temperature Range:-25~70 deg.C
>> Standard DIN Rail Mounting,super slim (12.5mm),low cost.
Applications:
>> DC current/voltage signal isolated/transfer/amplifier
>> Equipment and sensor signal acquisition
>> 4-20mA signal isolation and transfer
>> Ground-loop elimination
>> Electric power,medical instrument isolated safe bar.
>> No distortion in long distance signal
Max. Rated Value
(If the product operates in the max. rated vale in the long-term, may affect the durability, if exceed the max. values, may cause unrepairable damage.)
<10s)>
General Parameters
Note: For the product with special requirements on the load capacity of voltage and current signal, please notify us.
<1ms<>
Step Two : We have 3 different Installation methods , as bellow shows, you can confirm with us which one installation method suitable for you ?
Step three : the final model number confirmation:
Pin description for the 3 different installation methods for customers reference:
Other products:
Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download:
1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA
2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series
3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E
4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F
5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA
Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download:
1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC
2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter
3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC
4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC
6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter
7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter
8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter
9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter
10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter
11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter
12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring
13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC
14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC
15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier
16.Large current output type high precision signal transmitter
General characteristics:
>> Efficiency Grade:0.1/0.2
>> High precision, error and nonlinearity < 0.1%
>> 0-5V/0-10V/1-5V/0-+/-5V/0-+/-10V/0-10mA/0-20mA/4-20mA international standard current signal input and output
>> Three port isolation:Input/output/power supply isolation voltage can reach 3000VDC.
>> Temperature Range:-25~70 deg.C
>> Standard DIN Rail Mounting,super slim (12.5mm),low cost.
Applications:
>> DC current/voltage signal isolated/transfer/amplifier
>> Equipment and sensor signal acquisition
>> 4-20mA signal isolation and transfer
>> Ground-loop elimination
>> Electric power,medical instrument isolated safe bar.
>> No distortion in long distance signal
Max. Rated Value
(If the product operates in the max. rated vale in the long-term, may affect the durability, if exceed the max. values, may cause unrepairable damage.)
Continuous Isolation Voltage 3KVDC/rms |
| Power supply Volt. Input Range: ±25%Vdd |
| Operating Temperature - 45ºC ~ + 85ºC |
| Wielding Temperature (<10s)> |
| Voltage Signal Output Min. Load 2KΩ |
General Parameters
Parameters | Test Conditions | Min. | Typical Value | Max. | Unit | ||
| Isolation voltage | AC,50Hz,1min | 3000 | V(rms) | ||||
| Gain | 1 | V/V | |||||
| Gain temp. drift | 35 | ppm/ºC | |||||
| Non-linearity | 0.1 | 0.2 | %FSR | ||||
| Signal Input | Voltage | 0 | 15 | V | |||
| Current | 0 | 30 | mA | ||||
| Input offset voltage | 2 | 5 | mV | ||||
| Input impedence | Voltage | 1 | M | ||||
| Current | 50 | 250 | Ω | ||||
| Signal output | Voltage | -10 | 10 | V | |||
| Current | -20 | 20 | mA | ||||
| Load capacity | Voltage | Vout=10V | 2 | kΩ | |||
| Current | 0 | 350 50 | 650 | Ω | |||
| Frequency response | -3DB | 1 | KHz | ||||
| Signal output ripple | No filtering | 10 | 20 | mVRMS | |||
| Signal voltage temp. drift | 0.2 | mV/ºC | |||||
| Auxiliary power | Voltage | User-defined | 3.3 | 12 | 24 | VDC | |
| Consumption | 0.5 | 1 | W | ||||
| Operating ambient temp. | -45 | 85 | ºC | ||||
| Storage Temp. | -55 | 105 | ºC | ||||
Note: For the product with special requirements on the load capacity of voltage and current signal, please notify us.
Output | Output load capacity | Response time |
| 4-20mA | ≤350Ω (If the 650Ω load is required, please notify us) | <1ms<> |
| 0-±20mA | ||
| 0-±5V | > 2KΩ | |
| 0-±10V | ||
| 1-5V |
Step Two : We have 3 different Installation methods , as bellow shows, you can confirm with us which one installation method suitable for you ?
Pin description for the 3 different installation methods for customers reference:
Other products:
Commonly used two-wire passive isolation amplifier, isolation transmitter IC, Sunyuan product technical information download:
1,4-20mA (0-20mA) Current Loop Isolator IC: ISOS 4-20mA
2,4-20mA two-wire passive I/V conversion isolation transmitter IC: ISO 4-20mA-O series
3,4-20mA isolation controller (active signal PLC current loop active load) IC: ISO 4-20mA-E
4,Two-wire passive sensor 4-20mA loop isolation distributor IC: ISO 4-20mA-F
5,Two-wire voltage signal power distribution isolation transmitter IC: ISO V-4-20mA
Commonly used active type (external auxiliary power supply required) isolation amplifier transmitter IC, product selection application data download:
1,ISO mV series: millivolt-level analog small signal dedicated isolation amplifier IC
2, ISO EM U(A)-P-O-T Series: Zero-point, gain-adjustable analog isolation amplifier isolation transmitter
3, ISO EM A(U)-P-O-S Series: Input Distribution Isolation Transmitter IC
4, ISO EM-U(A)-P-O-O Series: Analog Input Isolation Transmitter with 1 to 2 Output Low Cost Small Size IC mounted Package 5, ISO EM A-P-O Series: 0-±10V Bilateral DC (Voltage/Current) Signal Isolation Amplifier Isolation Transmitter IC
6, DIN3 ISOEM U-P-O(A-P-O) Series: Single DIN35 rail mounting packaging low cost small volume isolation transmitter
7,DIN 1X2 ISOEM U(A)-P-O Series: one input and two output DIN35 rail mounting packaging isolation transmitter
8,DIN 2X1 C-P-O Series: 2 input and 1 output analog average isolation transmitter
9,DIN 2X2 ISOEM U(A)-P-O Series: two in two out DIN35 rail mounting isolation transmitter
10,DIN 1X3 ISOEM U(A)-P-O Series:one in three out DIN35 Rail mounting isolation transmitter
11,DIN ISO AC Series: Passive two-wire AC to DC signal isolation transmitter
12,ISO EMH 4-20mA Series: High isolation barrier for track voltage monitoring
13,ISO F-P-O Series: Frequency Signal (FV/FI Conversion) Isolated Converter IC
14,ISO U(A)-P-F Series: Analog Signal to Frequency Pulse Signal (V/F) Isolated Transmitter IC
15,ISO EM RMS-P-O Series: Analog True RMS (RMS) Signal Isolation Transmitter Isolation Amplifier
16.Large current output type high precision signal transmitter